Request a Quote




Message

Sending...
Products By Manufacturer


BJM Submersible Pumps

Page
of

Baby Series Submersible Pumps -  The BJM Baby Series is a handy little 12 volt utility pump for use in areas where conventional AC power is not available.  The Baby is available in a manual or automatic configuration.


J Series Submersible Pumps -  The BJM J-Series electric submersible pumps offer top performance and high quality for a very modest investment.  Motor casings, hardware and impeller shafts are made from 304 stainless steel, with all other exposed parts made of cast iron.  Also available in a stainless steel version (JX) and a high temp version (JF and JXF).  Pumps 1/2HP and above, feature double mechanical seals which work in a separate oil chamber.  Oil seal ring(s) are installed above the impeller to help keep impurities and abrasives away from the mechanical seals.  All pumps are equipped with overload protection which guards against low and high amperage as well as excessive temperatures.  The J55 and J75 can also be mounted on the BJM slide rail system.

S Series Submersible Pumps -  The BJM S Series pumps are heavy duty cast iron construction and feature non-clog, single vane impellers designed for high volume solids handling performance.  They are also available in a stainless steel version (SX) and a high temperature version (SF and SXF).  Standard features include a 33ft. power cord, 304SS motor housing, double mechanical seals, additional lip seal installed above the impeller, winding protection, class F motor insulation and automatic switch that turns motor off if temperature and/or amp draw is too high.


SK Series Submersible Pumps -  The BJM Shredder (SK) pumps reduce solids to a size slightly larger than if passed through a grinder pump.  The shredding action is caused by using a cutter style impeller with a tungsten carbide tip against a "spiral" shaped diffuser plate.  Standard 33ft. power cable, 304SS Motor Housing, double mechanical seals, an additional lip seal installed above the impeller, winding protection, class F motor insulation and a thermal switch that turns the motor off if temperature and/or amp draw is too high.  Also available in stainless construction (SKX), a high temperature version (SKF and SKXF) and an explosion proof version (XP-SK).


SV Series Submersible Pumps -  The BJM SV Series pumps are equipped with vortex type recessed impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids.  These pumps will pass solids up to 90% of pump outlet diameter.  Standard 33ft. power cable on pumps ½ HP and below and 50ft. on pumps 1HP and above, 304SS motor housing, double mechanical seals, an additional lip seal installed above the impeller, winding protection, class F motor insulation and a thermal switch turns the pump motor off if temperature and/or amp draw is too high.


R Series Submersible Pumps -  The BJM R Series pumps are ideal for use in constructions sites, mines, fountains and other services in industrial plants and utilities.  These pumps feature a top discharge, 33ft. power cable on pumps ½ HP and below and 50ft. on pumps 1HP and above, 304SS motor housing, double mechanical seal, an additional lip seal installed above the impeller, winding protection, class F motor insulation and a switch that turns the motor off if temperature and/or amp draw is too high. When the motor cools the switch will automatically reset and the pump will turn back on.  Also available in stainless steel construction (RX).


Perfecta Series Submersible Pumps -  The BJM Perfecta Series pumps are ideal for handling everything from dirty water to corrosive liquids.  Well suited for use in the metal plating, salt processing, marine, agriculture, aquaculture, chemical and other industries.  Units are a virtually unbreakable compact and lightweight design - only 13.5 lbs.  They offer excellent resistance to a variety of chemicals and feature both a 1-1/4" FNPT and a 1-1/2" tapered hose discharge connection and thermal breaker incorporated in motor windings.  The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard.  Not for use with flammable liquids.  Verify chemical compatibility before operating pump.


LWA Series Submersible Pumps -  The BJM LWA Series pumps are submersible and light in weight but heavy in features.  These are rugged design agitator type pumps in abrasion resistant hard metal construction for handling dirty water to light slurry applications.  Built-in agitator forces the suspension of settled solids so they can be removed by the pump.


KB Series Submersible Pumps -  The KB Series pumps from BJM is designed for heavy duty dewatering and light slurry applications such as settling basins, retention ponds, wash down sumps, quarries, barge and tank cleanout, etc.  KB Series pumps feature abrasive resistant chrome iron components, an inlet agitator to suspend settled solids, semi- open impeller, class H motor insulation, built in current and thermal overload protection, double mechanical seals, heavy duty lip seal ahead of the mechanical seals and a top discharge space saving design.


KZE Series Submersible Pumps -  The BJM KZE Series pumps are high capacity hard metal submersible slurry pumps with built in suction agitator, designed to handle difficult pumping services in mining, mineral processing, quarries, steel production, and other industries.  These rugged pumps feature double mechanical seals, laby and lip type seal chamber protection, permanently grease lubricated heavy duty upper and lower bearings, semi-open hard metal slurry type solids handling impeller and a hard metal agitator keeps heavy solids from settling and allows them to be pumped away.  Motors are 1800 rpm with class H insulation, 50' power cables as standard, 50' seal leak sensor cable with moisture sensing probe and motor thermal sensors.


Page
of