Products by Type

Self-Priming Centrifugal Pumps
Process Duty PumpsStandard End-Suction PumpsSealless PumpsSelf-Priming Centrifugal PumpsMulti-stage PumpsDiaphragm PumpsVertical Immersion PumpsDouble Suction PumpsVertical Turbine PumpsRegenerative Turbine PumpsIn-line Centrifugal PumpsSubmersible Centrifugal PumpsSlurry PumpsSubmersible Turbine PumpsHand Operated PumpsShaft Sealing ProductsMixing EquipmentControls & AccessoriesProgressive Cavity PumpsMetering PumpsRotary Gear/Vane PumpsSanitary Pumps

AMT 1" Engine Driven Utility Pumps

The AMT/IPT line of Engine Driven Utility pumps offers economy, durability, portability and performance all in one neat package. Ideal for general purpose dewatering, irrigation, spraying, washdown and agricultural applications.

• Aluminum Construction
• Buna-N Mechanical Seal and O-Ring
• 1˝ NPT Port Sizes
• Portable, Lightweight
• Self-Priming
• Semi-Open, Clog Resistant Impeller
• Engine 4-Cycle Options:
• Model 1G1XH: Honda GX25
• Model 4382-96: Honda GXH50
• Model 1G4XAR: Briggs & Stratton

Super T Series Self-Priming Pumps

Super T Series Self-Priming Pumps - Offering the same reliability and performance as the T Series®, the Super T Series provides additional advanced design features such as external shimless adjustment, dual protection of bearings and an "easy-grip" cover plate handle.  The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system.  These pumps feature a large volute design that allows them to reprime automatically in a completely open system without the need for suction or discharge check valves - and they can do it with the pump casing only partially filled with liquid and a completely dry suction line.

AMT 2" Engine Driven Dewatering Pumps

The AMT line of Engine Driven Dewatering pumps offers economy, durability, portability and performance all in one neat package. Ideal for general purpose dewatering, irrigation, spraying, washdown and agricultural applications. Cast iron pumps feature dual volute design that reduces radial load on engine. Built-in check valve enables constant self-priming to 20 feet. Pump construction
materials available in cast iron or corrosive resistant polypropylene components featuring removeable/replaceable volute and impeller. Pumps are available with Briggs & Stratton or Honda engines. Viton®, EPDM and Silicon Carbide mechanical seal options are available on specific models.

Cast Iron or Thermoplastic Construction
• Buna-N or Viton® Mechanical Seal (Depending on Model)
• Optional Seals Available
• 2˝ NPT Port Size
• Self-Priming up to 20 Ft.
• Semi-Open, Clog Resistant Impeller
• Engine Options: Honda and Briggs & Stratton
• Carry Handle Included
• Heavy Duty Steel Base Installed on Cast Iron Models
• Built-in Check Valve

AMT 2" Solids Handling Engine Driven Pumps

The IPT line of Cast Iron Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, agriculture/liquid fertilizer, irrigation, commercial draining and construction. All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines. Simple four bolt design for easy cleanout, tool included. EPDM/EPR seal and gaskets for use with many anti-freeze, alcohols, ozone, freon, etc. Check your specific chemical for compatibility.

• Heavy Duty Cast Iron Construction
• EPDM/EPR Mechanical Seal, O-Rings and Gaskets
• 2˝ NPT Port Sizes
• Self-Priming up to 20 Ft.
• Semi-Open, Clog Resistant Impellers
• Maximum Solids Handing 1/2˝
• Built-in EPDM/EPR Check Valve
• Engine Options: Honda, Briggs & Stratton Gasoline or Hatz Diesel
• Heavy Duty Steel Roll Frame Included
• Optional Wheel Kit Available

Super U Series Self-Priming Pumps

Super U Series Self-Priming Pumps - Offering the same reliability and performance as the U Series®, the Super U Series® provides additional features such as external shimless adjustment, dual protection of bearings and an "easy-grip" cover plate handle.  These pumps are among the most efficient self-priming, solids-handling pumps available.  Their unique hydraulic design and smooth wall volute casing minimize friction loss and drag.  The multi-vane, open impeller is designed for high efficiency operation yet can still handle limited solids.  The pumps not only deliver high efficiencies (up to 75%), they also perform efficiently across a broad operating range.

JEU Self-priming Pumps

JEU Self-priming Pumps -  The model JEU self-priming jet pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and rugged continuous duty.  The model JEU jet pump is suitable for many general clean water applications that require corrosion resistance including water supply, pressure boosting, small irrigation systems and pool/tank emptying.  NSF/ANSI 61 Annex G listed.

AMT 2" Dredging Engine Driven Pumps

AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving, pier maintenance, emergency bilging and wash down. This pump is constructed of wear resistant high chromium stainless steel internal components that are designed to last for over 500 hours of service with regular maintenance of rinsing pump after each use. The high chromium stainless steel components are investment cast and CNC machined for maximum efficiency, performance and quality. Dual volute design reduces radial load on engine. The 4-bolt casing design and removable type volute offers simple maintenance and fast cleanout of the pump.

• High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
• Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
• Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions
• O-Ring Casing Seal for Ease of Service and Cleaning
• Engine Options: Honda Gasoline & Hatz Diesel Engines
• Maximum Solids Handling 1/2˝
• Self-Primes to 10 Feet in 1 Minute with Maximum Suction Lift of 20 Feet
• Maximum Flow 173 GPM
• Discharge Pressure up to 44 PSI

Ultra V and VS Series Self-Priming Pumps

Ultra V and VS Series Self-Priming Pumps - Today’s pumping applications demand better and more efficient self-priming solids-handling pumps.  At Gorman-Rupp, providing greater performance and reducing installation and maintenance costs have always been our ultimate goals.  This makes the Ultra V one of the best values introduced to the pump industry in decades.  This next generation of solids-handling self-priming centrifugal pumps offers substantially higher pressures, flows, efficiencies and time-saving maintenance features, all in one package.  Ultra V Series pumps achieve up to 60% increased pressure and 40% increased flow over traditional self-priming trash pumps of the same size, while substantially increasing overall pumping efficiency.

AMT 2'' and 3'' Solids Handling Engine Driven Pumps

The AMT line of Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, irrigation, commercial draining and construction. All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines.

• Heavy Duty Cast Iron Construction
• Buna-N or Viton® Mechanical Seal Options
• 2˝ to 3˝ NPT Port Sizes
• Self-Priming up to 20 Ft.
• Semi-Open, Clog Resistant Impeller
• Engine Options: Honda, Briggs & Stratton Gasoline or Hatz Diesel
• Electric Start Options Available
• Heavy Duty Steel Roll Frame Included
• Optional Wheel Kit Available
• Built-in Check Valve

10 Series Self-Priming Pumps

10 Series Self-Priming Pumps - Gorman-Rupp 10 Series® pumps are specifically designed for handling solids, corrosive liquids and slurries.  They have few moving parts so maintenance is minimal.  If a clog occurs, it can be removed easily through the cover plate opening without disturbing piping or the use of any special tools.  The 10 Series line of pumps offers a variety of seal configurations to choose from for use with a number of different liquids.

AMT 2'' Cast Iron Engine Driven Trash Pumps

AMT Cast Iron Engine Driven Trash pumps are designed for applications which require high flow efficiency, solids handling capability and abrasion resistance. This series of pumps are also good for chemical spraying, handling and processing. These pumps are constructed of heavy duty CNC machined cast iron components featuring removable/replaceable cast iron volute and impeller. Simple four bolt clean out design permits easy removal of trash and debris without disconnecting hoses. Pumps are available with gasoline overhead valve or diesel engines from various engine manufacturers.

• Cast Iron Construction
• Viton® /Silicon Carbide Mechanical Seal
• 2˝ NPT Port Sizes
• Self-Priming up to 20 Feet with Built-In Viton® Check Valve
• Engine Options: Honda, Briggs & Stratton or Hatz Diesel
• Heavy Duty Steel Roll Frame Included
• Maximum Solids Handling up to 1˝ Diameter
• Maximum Head up to 105 Ft.
• Maximum Flow up to 185 GPM
• Optional Wheel Kit Available

80 Series Self-Priming Pumps

80 Series Self-Priming Pumps - The Gorman-Rupp 80 Series® pumps are designed for non-stop workloads.  The straight-in-suction design of these high-efficiency pumps guarantees quick and positive self-priming and allows them to operate at higher suction levels than most other self-priming centrifugal pumps.  Liquid enters directly into the impeller eye and a suction check valve prevents return flow when the pump is off.  Because 80 Series pumps have few moving parts, maintenance is minimal and simplified.  Our 80 Series pumps are available in a variety of construction materials and shaft seal options.

AMT 2" and 3" IPT Engine Driven Trash Pumps

IPT Portable High Volume, Self-priming Centrifugal Trash pumps come standard with a cast iron impeller to resist abrasion and one tool serviceability for easy cleanout. All pumps feature aluminum housing, cast iron wearparts, built-in check valve, suction strainer and heavy duty steel roll frame. Heavy duty cast iron flanges with male NPT threads that rotates in 90° increments. Easy access fill plug on discharge port.

• Cast Aluminum with Cast Iron Wearparts
• Silicon Carbide/Viton® Mechanical Seal
• EPDM/EPR O-Rings Standard with Optional Viton®
• 2˝ or 3˝ Removable Male NPT Suction and Discharge Ports
• Discharge Rotates in 90° Increments
• Engine Options: Honda, B & S Vanguard Gasoline or Hatz Diesel Engines
• Easy Clean Out with One Tool Serviceability
• Maximum Solids Handling up to 1-1/4˝
• Maximum Flow up to 290 GPM
• Maximum Head up to 125 Ft.
• Self-Priming to 26 Ft.
• Wheel Kit Optional

AMT 2'' to 4'' Gorman-Rupp Engine Driven Trash Pumps

The Gorman-Rupp line of Engine Driven Trash pumps (12D1,13D1,14D1 Series) are designed for applications which require high flow efficiency and solids handling capability. Pumps are constructed of heavy duty sand cast aluminum components featuring replaceable ductile iron impeller and steel wearplate. Simple front cleanout design permits easy removal of trash and debris without disconnecting hoses. Pumps are available with Honda gasoline engines. All are furnished with heavy-duty steel roll cages, suction strainers and 90° discharge elbows.
• Cast Aluminum Construction
• 2˝ to 4˝ NPT Port Size
• Solids Handling to 2˝ Diameter
• Viton®/Silicon Carbide Mechanical Seals
• Self-Priming to 25 Ft.
• Available with 5 HP to 13 HP Honda Gasoline Engine
• Heavy Duty Steel Roll Frame
• Suction Strainer and 90° Discharge Elbow Included

O Series Self-Priming Pumps

O Series Self-Priming Pumps - Gorman-Rupp O Series® pumps have a straight-in suction design (there is no check valve) which eliminates entrance restrictions and provides better suction performance when handling solvents and other similar liquids.  O Series pumps can be used for transfer, clean water supply, spray applications and many other industrial uses.  They provide reliable performance with few moving parts and offer savings in maintenance with high efficiency.  O Series pumps are available pedestal mounted in flex coupling or v-belt drive arrangements or close coupled to electric motors (some models).  Power takeoff models are also available with helical gear speed increasers for heads up to 400 feet (121 meters).

AMT 3'' and 4'' IPT Engine Driven Trash Pumps

IPT Portable High Volume, Self-priming Centrifugal Trash pumps include easy cleanout with replaceable cast iron impeller and volute that resist abrasion/wear. All pumps feature aluminum housing, cast iron wearparts, built-in check valve, suction strainer and heavy duty steel roll frame. Heavy duty cast iron flanges with male NPT threads that rotates in 90° increments. Easy access fill plug on discharge port.

• Cast Aluminum with Internal Cast Iron Wearparts for Durability
• Silicon Carbide/Viton® Mechanical Seal
• EPDM/EPR O-Rings Standard with Optional Viton®
• 3˝ or 4˝ Removable Male NPT Suction and Discharge Ports
• Discharge Rotates in 90° Increments
• Engine Options: Honda, B & S Vanguard Gasoline or Hatz Diesel Engines
• Maximum Solids Handling up to 2˝
• Maximum Flow up to 530 GPM
• Maximum Head up to 112 Ft.
• Self-Priming to 26 Ft.
• Wheel Kit Optional

AMT 3'' and 4'' Engine Driven Trash Pumps

AMT Engine Driven Trash pumps are designed for applications which require high flow efficiency and solid handling capability.
These pumps are constructed of heavy duty sand cast aluminum components featuring removeable/replaceable cast iron volutes, impellers and wearplates. Simple cleanout design permits easy removal of trash and debris without disconnecting hoses. Cast iron discharge port rotates in 90° increments. An electric start option is available on many models.

• Cast Aluminum with Cast Iron Wearparts
• Viton®/Silicon Carbide Mechanical Seal & Buna-N O-Ring/Gasket
• 3˝ & 4˝ Cast Iron Male Port Sizes with 90° Rotatable Discharge Port
• Self-Priming up to 20 Feet with Built-In Buna-N Check Valve
• Engine Options: Honda, Briggs & Stratton, Vanguard Gasoline or Hatz Diesel Engines
• 3˝ Models Featured in Heavy Duty Steel Roll Frame
• 4˝ Models Feature Base, Rails and 16˝ Tires
• Maximum Solids Handling up to 2˝
• Electric Start Option Available
• 3˝ & 4˝ Models Include Front Cleanout with Cast Aluminum Handles
• Optional Wheel Kit Available

AMT 6" Engine Driven Trash Pumps

The AMT 6″ Engine Driven Trash Pump is designed for applications requiring high volume flow and solid/debris handling capabilities. Pump is constructed of heavy duty sand cast aluminum with cast iron and stainless steel internal parts for wear resistance and durability. Patented built-in slide mechanism features nylon and powder coated steel components that permit servicing, repairing and cleaning entire pump without removing hoses or pump components from trailer. Digital tachometer/hourmeter installed. Requires 12 Volt Battery: BCI Group 24, Minimum of 500 CCA (Cold Crank Amps) Battery Box Cables Setup for Automotive Post Type Connection.

• Cast Aluminum Casing and Adapter
• Cast Iron Seal Plate, Volute and Manifold
• Stainless Steel Impeller
• Silicon Carbide Mechanical Seal and Buna-N O-Rings and Check Valve
• 6˝ NPT Port Size
• Self-Priming to 20 Feet
• Engine Options: Honda V-Twin or Kohler Diesel Engine
• Maximum Solids Handling 3˝
• Patented Unique Slide Mechanism Permits Complete Service of Pump Without Removing Hoses or Removing Pump Components from Trailer
• Seal Wash Feature for Extended Seal Life

VG and VGH Series Pumps

VG and VGH Series Pumps - Gorman-Rupp VG and VGH Series standard end-suction centrifugal pumps are engineered for maximum operating efficiency and minimal energy consumption.  The enclosed impeller design incorporates double curvature vanes for higher efficiency and the entrance to the volute casing has dynamic positioning vanes that direct the flow to the impeller for increased efficiency while reducing net positive suction head required (NPSHR).

AMT 1-1/2" Two-Stage Engine Driven High Pressure Pumps

The AMT line of Engine Driven High Pressure pumps is designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting. Two-stage models feature cast iron diffusers and 300 series stainless steel investment cast impellers for high efficiency producing up to 90 PSI that generally requires 8 horsepower or more from a single stage pump. Pumps offer a broad selection of gasoline engines from the leading engine manufacturer with dependable service worldwide. All models include: cast iron pipe nipples, 90° discharge elbow, strainer/foot valve and rugged heavy duty steel roll frame for protection and durability.

• Cast Iron Construction with Stainless Steel Closed Impellers
• Buna-N Mechanical Seal and O-Ring
• 1-1/2˝ NPT Port Size
• Self-Priming*
• Engine Options: Honda or Briggs and Stratton
• Maximum Flow up to 68 GPM
• Maximum Head up to 90 PSI
• Heavy Duty Steel Roll Frame Included
• Wheel Kit Available

Series 2100 Self-Priming Pumps

VERTIFLO SERIES 2100 SELF-PRIMING PUMPS

Typical Applications:

  • Liquids Entrained with Solids
  • General Industrial, Pulp & Paper, Mining, Meat Packing
  • Raw Sewage, Sludge
  • Slurries
  • Trash
  • Wastewater

Performance:

  • Capacities to 1300 GPM
  • Heads to 112 Feet TDH
  • Sizes: 3", 4" and 6"
  • Solids Handling: Up to 3" Diameter Sphere
  • Suction Lifts to 25 Feet

Construction:

  • Cast Iron
  • 316 Stainless Steel Fitted
  • All 316 Stainless Steel
  • CD4MCu Fitted
  • All CD4MCu

AMT 2" IPT Engine Driven High Pressure Pumps

IPT 2″ Engine Driven Portable High Pressure pumps are cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.

• Cast Aluminum Construction
• EPDM/EPR Mechanical Seals
• Optional Viton® Seal and Elastomers Available
• 2˝ Cast Iron Suction & Discharge Male NPT Port Sizes
• Maximum Flow up to 130 GPM
• Maximum Head up to 108 PSI
• Maximum Lift to 26 Ft.
• One Tool Serviceability
• Utilized for Fire Protection or Irrigation
• Discharge Port Rotates in 90° Increments
• Engine Options: Honda, Briggs & Stratton Gasoline or Hatz Diesel Engines
• Optional High Pressure Hose Kit and Wheel Kit Available

AMT 3'' IPT Engine Driven High Pressure Pumps

IPT 3″ Engine Driven Portable High Pressure pumps are cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.

• Cast Aluminum Construction with Cast Iron Diffusers
• EPDM/EPR Mechanical Seals
• Optional Viton® Seal and Elastomers Available
• 3˝ Cast Iron Suction & Discharge Male NPT Port Sizes
• Maximum Flow up to 185 GPM
• Maximum Head up to 89 PSI
• Maximum Lift to 26 Ft.
• One Tool Serviceability
• Utilized for Fire Protection or Irrigation
• Discharge Port Rotates in 90° Increments
• Engine Options: Honda, Briggs & Stratton Gasoline or Hatz Diesel Engines
• Optional High Pressure Hose Kit and Wheel Kit Available

AMT 2'' Two-Stage Engine Driven High Pressure Pumps

The IPT Self-priming Two-stage High Pressure Engine Driven pump includes precision cast high efficiency impellers to maximize performance and pressure. Cast iron diffusers for durability and extended life. Aluminum construction and heavy duty powder coated steel frame allows portability for use in many applications. This pump features cast iron male NPT ports, silicon carbide mechanical seals, EPDM/EPR O-rings and gaskets, built-in flapper/check valve and wrench for easy service of the pump. This unit is ideal for fire protection, emergency fire fighting, washdown and AG/sprinkler applications.

• Cast Aluminum Construction with Cast Iron Diffusers
• High Efficiency Two-Stage Precision Cast Aluminum Impellers
• 2˝ NPTM Cast Iron Suction Port
• Three-Way Cast Iron Discharge Port
• Viton® Mechanical Seal with Silicon Carbide and Carbon Faces
• EPDM/EPR O-Rings and Gaskets
• Maximum Head up to 155 PSI
• Maximum Flow up to 160 GPM
• Built-in Flapper/Check Valve Permits Self-priming to 20 Ft.
• Heavy Duty Steel Roll Frame Included
• Engine Options: Honda, Briggs & Stratton Gasoline or Hatz Diesel
• Optional Wheel Kit Available

AMT 2-1/2'' Engine Driven High Pressure Pumps

The IPT Engine Driven line of High Pressure/Fire pumps deliver excellent pressure and flow for use in many applications including: fire protection, emergency fire fighting, washdown and AG/Sprinkler. Portable units feature metal fuel tanks installed on engine or frame depending on model. 12 Volt DC electric start engines with recoil starter from Briggs & Stratton Vanguard, Honda Gasoline or Hatz Diesel engines are standard on these pumps. Vanguard models feature built-in exhaust prime. Honda and Yanmar models feature a manual hand prime. These pumps are equipped with Viton® Silicon Carbide/Carbon seal and Viton® O-rings/gaskets.

• Aluminum Construction with Replaceable Hard Coat Anodized Wear Ring
• Viton® Mechanical Seal with Silicon Carbide & Carbon Faces
• 2-1/2˝ NPT Port Sizes
• Exhaust Prime or Hand Prime Depending on Model
• Prime Assist to 19 Ft.
• Built-in Discharge Check Valve
• Discharge Pressure Gauge Included
• Suction Strainer, Nipples and Heavy Duty Steel Roll Frame with Battery Tray Included
• Maximum Head up to 165 PSI/ 380’ TDH
• Delivers to 270 GPM
• Available with B&S Vanguard, Honda Gasoline or Hatz Diesel with 12 Volt DC Electric Start
• Optional NPT to Fire Hose Thread Available – See Accessories Page
• Optional Wheel Kit Available

3796 Self-Priming Pumps

3796 Self-Priming Pumps - Goulds model 3796 i-FRAME process pump line is specifically designed to provide superior performance for self-priming services in the chemical process and other industries.

Trash Hog Self-priming Pumps

Trash Hog Self-priming Pumps - Goulds Trash Hog® is designed for superior solids handling capability, optimum pump performance and extreme ease of maintenance.  It is well suited to a wide range of industrial, pulp and paper, mining and municipal wastewater services.

Ampco R Series Centrifugal Pumps

R Series self-priming pumps have been serving the shipping industry in fire and bilge pump applications for decades.

This versatile pump is capable of self-priming up to 25ft/7.6m. The R Series features include temperature ratings as high as 225°F/ 105°C, multiple seal configurations and compact close-coupled design.

All R Series pumps are close-coupled to NEMA or IEC motors. Available corrosion resistant alloys include 316 stainless steel and nickel aluminum bronze.

R Series pumps have ABS (American Bureau of Shipping) type approval and are available for fast delivery.

Max Discharge Pressure:  175 PSI / 12 BAR
Max Flow Rate:  475 GPM / 108 mᵌ/hr
Max Viscosity:  1,200 cP
Seal Specifications:  6 Seal Options

AMT Self-Priming Pedestal Pumps

AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semi-open impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.

• Cast Iron & Stainless Steel Construction
• Buna-N Mechanical Seals on Cast Iron Models
• Viton® Mechanical Seals on Stainless Steel Models
• Optional Silicon Carbide Mechanical Seals Available
• 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes
• Dual Volute Design Reduces Radial Load on Motors
• Maximum Temperature
◆ Buna-N 180° F
◆ Viton® 200° F
• Self-Cleaning, Semi-Open Impeller
• Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

AMT Self-Priming Solids Handling Pedestal Pumps

AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in cast aluminum, cast iron or thermoplastic construction material. The units feature 3/8″ to 2″ solids handling construction and are fitted with a cast iron bearing housing, which contains two or three precision sealed ball bearings depending on specific model. Easy cleanout design by removing casing bolts permits removal of debris without disconnecting hoses. The 3″ & 4″ trash pump models feature cleanout covers with quick release handles for removal of debris. All units are self-priming to 20 feet.

• Available in Cast Aluminum, Cast Iron or Thermoplastic, Depending on Specific Model
• Buna-N or Viton® Mechanical Seal, Depending on Specific Model
• Optional Seals Available
• 2˝ to 4˝ NPT Suction and Discharge Ports
• Maximum Working Pressure up to 75 PSI
• Maximum Temperature 180° F
• Self-Priming to 20 Ft.
• Shaft Diameter
◆ 2˝ Models 3/4˝ ◆ 3˝ & 4˝ Models 1-1/8˝
• Sized From Minimum 3 HP to 15 HP Driver at 3,600 RPM, Depending on Model

AMT IPT Self-Priming Pedestal Pumps

Pedestal drive units for flex-coupling to an electric motor are available in general purpose, high pressure and trash versions. All models are standard with threaded impeller.

• Aluminum Construction
• High Pressure—Type P Only
◆ Aluminum Impeller with Cast Iron Volute for High Efficiency
◆ EPDM/EPR Seals and O-Rings
• Trash—Type S Only
◆ Cast Iron Impeller & Volute for Resistance to Wear and Abrasion
◆ Silicon/Carbide/Viton® Mechanical Seal and EPDM/EPR O-Rings

AMT Self-priming booster pumps

AMT Sprinkler/Booster pumps feature 300 Series Investment cast stainless steel closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature dual volute design to reduce radial load on motor and a built-in check valve to ensure fast priming after initial liquid is added to the pump. Cast iron construction provides durability and low maintenance. Easy cleanout design includes replaceable dual volute/diffuser and casing o ring for servicing. Twostage models provide additional pressure in fractional horsepower sizes for multi-sprinkler head applications. Type 21 mechanical seals handle maximum working pressure to 150 PSI. Pumps are available from 3/4 to 7-1/2 HP with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) motors.

• Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers
• Buna-N Mechanical Seal and O-Ring
• Optional Viton® Seal, Check Valve and O-Ring Available on Single Stage Models
• 1-1/2˝ or 2˝ NPT Ports Sizes
• Maximum Temperature 180° F
• Maximum Flow 157 GPM
• Maximum Head 180 Ft.
• Self-Priming to 20 Ft.
• Single Stage (379/365 Series) Two Stage (478 Series) Construction
• Single Stage Models Feature Removable Dual Volute Design
• Available with 3/4 to 7-1/2 HP Single or Three Phase Motors

AMT corrosion resistant self-priming pumps

AMT Self-Priming 300 Series Stainless Steel or Bronze Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/fumigants. All models are equipped with Totally Enclosed Fan Cooled (TEFC) motors. 300 Series Stainless Steel models are fitted with Teflon® mechanical seal and o-ring, while bronze models come standard with Viton® mechanical seal and o-ring. Pumps are selfpriming to 6 feet. Pumps are designed to handle liquids with specific gravities up to 1.3 and viscosities to 100 SSU.
• Available in: Bronze or 300 Series Investment Cast Stainless Steel Construction with Stainless Steel Impeller
• Viton® or Teflon® Mechanical Seal and O-Ring – Depending on Model
• Dual Volute Design
• 1-1/2˝ NPT Suction and Discharge Ports
• Maximum Temperature
◆ Bronze 200° F
◆ Stainless Steel 250° F
• Maximum Flow 132 GPM
• Maximum Head 63 Ft.
• Self-Priming to 6 Ft.
• Self-Cleaning, Semi-Open Impeller
• 3/4 to 2 HP Totally Enclosed Fan Cooled (TEFC) Motor Single or Three Phase Motor

AMT 1-1/2" Self-priming pumps

This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8″ diameter semi-solids. Built-in flapper/check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Stainless steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals.

• 300 Series Investment Cast Stainless Steel Construction with Viton® Seals
• Cast Iron Construction with Buna-N Seals
• Optional Silicon Carbide Seals Available
• 1-1/2˝ NPT Port Size
• Maximum Temperature
◆ Stainless Steel 200° F
◆ Cast Iron 180° F
• Maximum Flow 120 GPM
• Maximum Head 102 Ft. (44 PSI)
• Self-Priming up to 20 Feet with Built-in Check Valve
• Self-Cleaning, Clog Resistant Impeller
• 1/2 to 3 HP 56J Single or Three Phase 3450 RPM Motors

AMT 1" and 1-1/4" Self-priming pumps

The AMT Self-Priming Cast Iron Centrifugal pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open impeller. The units will selfprime to 20 feet. Mounting base features 7/16″ mounting holes, which are 6″ OC (on center). Built-in carrying handle offers portability.

• Cast Iron Construction
• Buna-N Mechanical Seal and O-Ring
• Optional Viton® or Silicon Carbide Mechanical Seal and O-Ring
• 1˝ & 1-1/4˝ NPT Suction and Discharge Ports
• Maximum Temperature 180° F
• Maximum Flow 82 GPM
• Maximum Head 70 Ft.
• Self-Priming to 20 Ft.
• Self-Cleaning, Semi-Open Impeller
• 1/3 to 1-1/2 HP Single or Three Phase Motors

AMT 1" and 2" Self-priming pumps

This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and chemical processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8″ diameter semi-solid and EPDM/EPR seals for liquid chemical transfer with specific gravities up to 1.3. (Verify chemical capability with liquids) Built-in check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Pumps feature Dual cycle 50/60 Hz TEFC motors.

• Cast Iron Construction with EPDM/EPR Seals
• Easy Cleanout Pull From Rear Design
• 1˝ to 2˝ NPT Port Sizes
• Maximum Temperature 180° F
• Maximum Flow 130 GPM
• Maximum Head 100 Ft. (43 PSI)
• Self-Priming up to 20 Feet with Built-in Check Valve
• Self-Cleaning, Clog Resistant Impeller
• 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors
• Motors Feature 303 Stainless Steel Shaft

AMT 1" stainless self-priming pumps

AMT 300 Series Investment Cast Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use with non-flammable liquids.

• 300 Series Investment Cast Stainless Steel Construction
• Viton® Mechanical Seal and O-Ring
• Handles Liquids and Chemicals with Specific Gravities up to 1.6
• 1˝ NPT Suction and Discharge Ports
• Maximum Temperature 200° F
• Maximum Flow 66 GPM
• Maximum Head 68 Ft.
• Self-priming to 6 Ft.
• Self-Cleaning, Semi-Open Impeller
• 1/3 to 2 HP Single or Three Phase Motors

AMT 2" self-priming pumps

This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8″ diameter semisolids. Built-in flapper/check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Stainless steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals.

• 300 Series Investment Cast Stainless Steel Construction with Viton® Seals
• Cast Iron Construction with Buna-N Seals
• Optional Silicon Carbide Seals Available
• 2˝ NPT Port Size
• Maximum Temperature
◆ Stainless Steel 200° F
◆ Cast Iron 180° F
• Maximum Flow 150 GPM
• Maximum Head 102 Ft. (44 PSI)
• Self-Priming up to 20 Feet with Built-in Check Valve
• Self-Cleaning, Clog Resistant Impeller
• 1-1/2 to 3 HP Single or Three Phase 3450 RPM Motors

AMT 2" self-priming high pressure pumps

AMT 2” Self Priming High Pressure Pumps are self-priming high pressure booster pumps with a two stage impeller design to provide additional pressure. All models feature cast iron construction with aluminum impellers and Viton Mechanical Seals. Built-in EPR/EPDM check valve for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing. These units are self-priming up to 20 feet and are suitable for high pressure applications such as dewatering, sprinkler/booster, irrigation, and fire protection. Units are close coupled and are available in 7-1/2 to 10 horsepower TEFC electric motors.

• Cast Iron Construction with Aluminum Impeller
• Viton Mechanical Seal with EPR/EPDM Check Valve and O-Rings
• 2” NPT Suction and Discharge Ports
• Maximum Temperature 180° F
• Maximum Flow 122 GPM
• Max Head 270 Ft. (116 psi)
• Self-Priming to 20 Ft.
• Closed Vane Aluminum Impeller Designed for High Pressure Performancee
• 7-1/2 to 10 HP TEFC, Single and Three Phase Motors
• Optional Mounting Base Available (A200-90)

AMT 2" to 4" solids handling self-priming pumps

AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2″, 3″ or 4″. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.

• Cast Iron Construction
• Silicon Carbide/Viton® Mechanical Seal
• 2˝, 3˝ & 4˝ NPT Ports Sizes
• Maximum Temperature 180° F
• Self-Priming to 20 Ft.
• Stainless Steel Semi-Open, Clog Resistant Impeller
• Buna-N Check Valve and O-Ring
• Removable Cast Iron Volute/Wearplate
• Easy Cleanout Design
• 3˝ & 4˝ Models Feature Front Cleanout
• Pull-from-Rear Design
• Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors

AMT 3" self-priming pumps

AMT Self-Priming Cast Iron Centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 3/8″ diameter semi-solids. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing.

• Cast Iron Construction with Stainless Steel Impeller
• Buna-N Mechanical Seal, Check Valve and O-Ring
• Optional Silicon Carbide Seal Available
• 3˝ NPT Suction and Discharge Ports
• Maximum Solids Handling 3/8˝
• Maximum Temperature 180° F
• Maximum Flow 375 GPM
• Maximum Head 110 Ft.
• Self-Priming to 20 Ft.
• Self-Cleaning, Semi-Open Impeller
• 3 to 7-1/2 HP TEFC, Single and Three Phase Motors
• Optional Mounting Base Available

AMT 3/4" and 1" self-priming utility pumps

Model 4850-97
• Cast Bronze Construction
• Buna-N Mechanical Seal and O-Ring
• 3/4˝ NPT Suction and Discharge Ports
• 1/8 HP, 12 Volt DC, 3700 RPM Motor
• Maximum Suction Lift 4 Ft

Model 2851-96
• Aluminum Construction
• Viton® Mechanical Seal and O-Ring
• 1˝ NPT Suction and Discharge Ports
• 1/3 HP ODP Motor with 8 Ft. 115 VAC Power Cord
• Two Garden Hose Adapters and Carry Handle Included
• Self-Cleaning Impeller
• Maximum Suction Lift 15 Ft. Without Foot Valve

Model 4292-96
• Cast Aluminum Construction
• Buna-N Mechanical Seal and O-Ring
• 1˝ NPT Suction and Discharge Ports
• Two Garden Hose Adapters and Carry Handle Included
• 1/2 HP NEMA 56J Open Drip Proof (ODP) Motor with 8 Ft. 115 VAC Cord
• Maximum Suction Lift 6 Ft.

AMT 4" self-priming pumps

AMT Self-Priming Cast Iron Centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping connections. All models are fitted with self-cleaning, semi-open stainless steel impeller, which can handle 1/2″ diameter semi-solids. Built-in check valves for fast priming are standard on all units. Fill and drain plugs for easy installation and servicing.

• Cast Iron Construction with Stainless Steel Impeller
• Buna-N Mechanical Seal, Check Valve and O-Ring
• Optional Silicon Carbide Seal Available
• 4˝ NPT Suction and Discharge Ports
• Maximum Solids Handling 1/2˝
• Maximum Temperature 180° F
• Maximum Flow 660 GPM
• Maximum Head 114 Ft.
• Self-Priming to 20 Ft.
• Self-Cleaning, Semi-Open Impeller
• 10 to 15 HP TEFC, Single and Three Phase Motors
• Optional Mounting Base Available

AMT GR self-priming centrifugal pumps

This line of Gorman-Rupp self-priming centrifugal pumps are coupled to an hazardous duty explosion proof motor. These pumps are designed for use in hazardous environments and/or for handling flammable liquids. 1-1/2″ and 2″ NPT port sizes available with single or three phase motors. All models are self-priming and are equipped with Viton® seals with carbon and Ni-resist faces capable of handling liquids with temperatures to 160° F. Maximum flow to 128 GPM and maximum operating pressure to 31 PSI. Exp. Proof Classes: Class 1, Group D, Class 2, Goups E,F,G or FG.

• Cast Iron Construction
• Viton® Seals with Carbon and Ni-resist Faces
• 1-1/2˝ & 2˝ NPT Port Sizes
• Self-Priming to 20 Ft.
• Maximum Operating Pressure to 31 PSI
• Maximum Temperature 160° F
• Maximum Flow 128 GPM
• Maximum Head 72 Ft.
• Solids Handling up to 3/8˝ Diameter
• 1/2 to 2 HP Single and Three Phase 3450 RPM Motors

Request an info

Certificates & Achievements

ISO CertificationISO Certification