Products by Type

In-line Centrifugal Pumps
Process Duty PumpsStandard End-Suction PumpsSealless PumpsSelf-Priming Centrifugal PumpsMulti-stage PumpsDiaphragm PumpsVertical Immersion PumpsDouble Suction PumpsVertical Turbine PumpsRegenerative Turbine PumpsIn-line Centrifugal PumpsSubmersible Centrifugal PumpsSlurry PumpsSubmersible Turbine PumpsHand Operated PumpsShaft Sealing ProductsMixing EquipmentControls & AccessoriesProgressive Cavity PumpsMetering PumpsRotary Gear/Vane PumpsSanitary Pumps

Ebara EVMSU Multi-stage Pumps

EBARA’s Model EVMSU vertical multistage pumps feature a newly designed “Shurricane™” impeller that reduces the axial thrust load with higher pump efficiency created by the innovative hydraulic design of the impeller shrouds. The Shurricane™ impeller is designed to deliver optimum hydraulic efficiency and significantly reduce axial thrust loads so that standard C-face motors may be used with no special (thrust) bearing requirements. The EVMSU also features cartridge type mechanical seals (single inside unbalanced or balanced) as required. To allow for mechanical seal replacement without removal of the motor, a spacer coupling is provided on units with motor horsepower of 7-1/2 and above.

With hydraulic coverage to 390 GPM and 930 feet TDH, the EBARA model EVMSU is ideal for booster, water purification, and hot water applications.

Note: Models EVMSU/EVMSUL 1-20 and EVMUG/EVMUL 32-64 certified to NSF/ANSI 61 & 372.

Key Features

  • Standard NEMA motor sizes
  • Low axial thrust impeller enables long motor bearing life
  • Air vent in casing cover allows proper venting to prevent air entrapment and dry run
  • Fill port in casing cover allows for water fill as well as installation of sensors, gauges and other measuring devices
  • Liner ring is a self-aligning floating design constructed to prevent swelling at high temperatures
  • Tungsten carbide lower pump bearings and sleeves are standard construction for all services, providing maximum operating life
  • Direct drive pump and motor shafts are keyed for positive, reliable power transmission with no adjustments necessary
  • “Flexible” floating outer casing allows for thermal expansion in hot water applications, preventing deformation due to pressure fluctuations
  • Square-edge four spline shaft provides positive location and drive of impellers, eliminating wear
  • Dimensions & flanges – installation is to market accepted dimensions for easy upgrade of existing installations
  • Piping connection options include Fixed ANSI compatible flange, Oval flange, Loose ANSI compatible flange, victaulic, and clamp connections
  • Mechanical seal – Silicon Carbide/Carbon/Viton mechanical shaft seal. Cartridge mechanical seal design enables replacement without disassembling the motor bracket

3996 Vertical In-line Process Pumps

3996 Vertical In-line Process Pumps - Specifically designed to provide superior performance for in-line services in the chemical process and other industries.

AMT 1-1/2" in-line circulator pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Pumps are powered by a 56C NEMA Totally Enclosed Fan Cooled (TEFC) frame electric motor with 1/2″ conduit connection. Pumps are interchangeable with other manufacturers.

• Cast Iron or Silicon Bronze Construction with Silicon Bronze Impeller
• EPDM/EPR Mechanical Seal and Casing O-Ring Standard, Viton® Option Available
• Includes Mounting Flange Kit for 1-1/2˝ NPT
• Special Flange Designed to Accept B&G Flange or Standard 150lb 4-Bolt Flange
• Maximum Water Temperature 225° F (107° C)*
• Maximum Flow 130 GPM
• Maximum Head 53 Ft. (23 PSI)
• 1/8˝ NPT Seal Wash/Vent Port
• Single Phase or Three Phase TEFC 56C Motor

AMT 3/4" to 2" in-line circulator pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. All models are powered by a single phase 115 VAC ODP 56J NEMA frame 1/4 HP electric motor with 1/2-14 NPSM conduit connection. Direct coupled design eliminates stub shaft, oiled bearing and coupling, reducing maintenance. Pumps are interchangeable with other manufacturers, see cross reference on specification page.

• Cast Iron or Silicon Bronze Construction
• EPDM/EPR Mechanical Seal and Casing O-ring, Buna-N Option Available
• Investment Cast Stainless Steel Impeller with 569/570/571 Series, 572 Series Includes Silicon Bronze Impeller
• Accessory Mounting Flanges Available 3/4˝ to 2˝ NPT
• Maximum Temperature 225° F (107º C)*
• Maximum Flow 58 GPM
• Maximum Head 19 Ft. (8 PSI)
• Single Phase 1/4 HP, 1725 RPM, 115 VAC ODP 56J Motor

AMT 3" in-line circulator pumps

AMT Inline Circulator Pumps are designed for continuous duty industrial/commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Pumps are powered by a 56C NEMA frame electric motor with 1/2″ conduit connection. Pumps are interchangeable with other manufacturers, see cross reference on specification page.
• Cast Iron or Silicon Bronze Construction
• EPDM/EPR Mechanical Seal and Casing O-Ring, Buna-N Option Available
• Silicon Bronze Impeller
• Mounting Flange Kit for 3˝ NPT Included
• Maximum Working Pressure 150 PSI
• Maximum Temperature 225° F (107° C)*
• Maximum Flow 150 GPM
• Maximum Head 28 Ft. (12 PSI)
• Single Phase or Three Phase TEFC 56C Motor

Request an info

Certificates & Achievements

ISO CertificationISO Certification