CDU Close-coupled Pumps

CDU Close-coupled Pumps - The model CDU end suction centrifugal pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and rugged continuous duty.  The model CDU is suitable for many general water applications that require corrosion resistance including moderately aggressive liquids.  NSF/ANSI 61 Annex G listed

MEGGA Series PC Centrifugal Pumps

Series PC Centrifugal Pumps - Megga Series PC centrifugal pumps are a standard end-suction design featuring a rotatable tangential discharge, high efficiency fully enclosed impeller in a maintenance friendly back pull-out design.  Megga Series PC pumps utilize industry standard shaft seals and JM frame motors for quick deliveries in an economical package.

Click here for on-line pump selection

Ebara 3U Close-coupled Pumps

3U Close-coupled Pumps -  Model 3U end suction centrifugal pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance, and rugged continuous duty.  Suitable for many general water applications that require corrosion resistance including moderately aggressive liquids.  NSF/ANSI 61 Annex G listed.

TruBlue 710 and 712

Manufactured by ITT-Goulds pumps, TruBlue model 710 and 712 offer a design configuration better suited to basic industrial pump applications without sacrificing quality and reliability.  TruBlue pumps are available in both a frame-mounted and close-coupled configuration for maximum installation flexibility.  They also maintain standard ANSI pump dimensions for easier replacement of existing ANSI pumps.  Turn to TruBlue pumps for your next general industrial application.

DWO Close-coupled Pumps

DWO Close-coupled Pumps -  The model DWO open impeller end suction pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance and rugged continuous duty.  The model DWO is suitable for applications with suspended solids including food and beverage processes, dirty liquid handling, waste streams and other services that may contain solids.

Series 1312 Centrifugal Pumps

VERTIFLO SERIES 1312 CENTRIFUGAL PUMPS

Typical Applications:

• General Pumping
• Chemicals
• Wash Systems
• Deionized Water
• Process
• OEM

Performance:

• Capacities to 240 GPM
• Heads to 160 Feet TDH
• 1750 and 3500 RPM
• Back Pull-Out Construction
• Mechanical Seal
• Semi-Open Impeller

Construction:

• Cast Iron
• Bronze Fitted
• 316 Stainless Steel Fitted
• All 316 Stainless Steel

C Series Centrifugal Pumps

C Series Centrifugal Pumps - These close-coupled stainless steel centrifugal pumps from MTH provide economical performance for 5 to 100 GPM applications requiring discharge heads up to 140 feet.  Our C Series pumps deliver excellent efficiency with low NPSH requirements in a compact corrosion resistant design.  Pedestal mount version is also available.

Series 1300 Centrifugal Pumps

VERTIFLO SERIES 1300 CENTRIFUGAL PUMPS

Typical Applications:

• Industrial Process
• Pollution Control
• General Pumping
• Spray Systems
• Deionized Water
• Waste Water
• Clear Liquids
• Corrosive Liquids
• Chemicals

Performance:

• Capacities to 3600 GPM
• Heads To 275 Feet TDH
• Temperature to 250° F
• Back Pull-Out Construction
• Semi-Open Impeller
• Packing or Mechanical Seal

Construction:

• Cast Iron
• 316 Stainless Steel Fitted
• All 316 Stainless Steel
• Alloy 20
• CD4MCu

D Series Centrifugal Pumps

D Series Centrifugal Pumps - The MTH D Series close-coupled centrifugal pumps represent the most economical, high performance alternative for high flow applications involving low to moderate pressures (heads to 360 feet).  Available in cast iron/bronze fitted construction, our D Series pumps deliver high efficiency operation in an economical package.  This product line features horizontal, vertical flange mount and self-priming configurations for maximum application flexibility.

Series 1400 Centrifugal Pumps

VERTIFLO SERIES 1400 CENTRIFUGAL PUMPS

Typical Applications:

• Industrial Process
• Pollution Control
• General Pumping
• Spray Systems
• Deionized Water
• Waste Water
• Clear Liquids
• Corrosive Liquids
• Chemicals

Performance:

• Capacities to 3600 GPM
• Heads to 275 Feet TDH
• Temperature to 250° F
• Back Pull-Out Construction
• Semi-Open Impeller
• Packing or Mechanical Seal

Construction:

• Cast Iron
• 316 Stainless Steel Fitted
• All 316 Stainless Steel
• CD4MCu

DC10 12 Volt Centrifugal Pump

DC10 12 Volt Centrifugal Pumps - The MTH model DC10 is a handy 12 volt unit constructed in stainless steel, capable of flows to 25 GPM, heads up to 92 Feet (40 PSI) and temperatures from -20°F to 250°F.  This compact close-coupled design utilizes a 1HP, 12 volt DC, TENV motor and weighs only 48 lbs.

Series 1400LF Low Flow Centrifugal Pumps

VERTIFLO SERIES 1400LF Low Flow Centrifugal Pumps

Typical Applications:

• Boiler Feed
• Condensate
• Chemical Process
• Washdown
• Spray Washers

Performance:

• Capacities to 50 GPM
• Heads to 345 Feet TDH
• Temperature to 250° F
• Back Pull-Out Construction
• Radial Vane Impeller
• External Impeller Adjustment
• Packing or Mechanical Seal

Construction:

• Ductile Iron
• Bronze Fitted
• 316 Stainless Steel Fitted
• All 316 Stainless Steel

Series 1500 Vortex Centrifugal Pumps

VERTIFLO SERIES 1500 VORTEX CENTRIFUGAL PUMPS

Typical Applications:

• Food Processing Solids
• Waste Water Treatment
• Pollution Control
• Slurries
• Industrial Process
• Solids

Performance:

• Capacities to 1600 GPM
• Heads to 170 Feet TDH
• Temperature to 250° F
• Back Pull-Out Construction
• Fully Recessed Vortex Impeller
• External Impeller Adjustment
• Packing or Mechanical Seal

Construction:

• Cast Iron
• 316 Stainless Steel Fitted
• All 316 Stainless Steel
• Alloy 20
• CD4MCu

Series 1600 Vortex Centrifugal Pumps

VERTIFLO SERIES 1600 VORTEX CENTRIFUGAL PUMPS

Typical Applications:

• Food Processing Solids
• Waste Water Treatment
• Pollution Control
• Slurries
• Industrial Process
• Solids

Performance:

• Capacities to 1600 GPM
• Heads to 170 Feet TDH
• Temperature to 250° F
• Back Pull-Out Construction
• Fully Recessed Vortex Impeller
• External Impeller Adjustment
• Packing or Mechanical Seal

Construction:

• Cast Iron
• 316 Stainless Steel Fitted
• All 316 Stainless Steel
• Alloy 20
• CD4MCu

Ampco Z Series Centrifugal Pumps

The Z Series high efficiency centrifugal pumps shine in applications where corrosion resistance is of the utmost importance. Applications range from the shipping industry to desalinization and reverse osmosis systems.

Z Series pumps are offered in 3 standard alloys; duplex 2205, 316 stainless steel and nickel aluminum bronze for superior corrosion resistance. Other alloys are also available like Hastalloy C, Alloy 20 and 316L stainless steel.

All Z Series pumps have ABS (American Bureau of Shipping) type approval and are available for fast delivery. 

Z Series pumps are close-coupled to NEMA or IEC motors.

Max Discharge Pressure:  175 PSI / 12 BAR
Max Flow Rate:  3450 GPM / 784 Mᵌ/hr
Max Viscosity:  1,200 cP
Seal Specifications:  6 Seal Options

Ampco K Series Centrifugal Pumps

Ampco’s K Series line brings the same durability as the Z Series but in a smaller size. K Series high efficiency pumps have NPT threaded connections and are close-coupled to NEMA 56J frame motors. Available alloys include 316 stainless steel and nickel aluminum bronze. Duplex 2205 is also available.

All K Series pumps have ABS (American Bureau of Shipping) type approval and are available for fast delivery.

Features of the K Series include pressure capabilities as high as 150 PSI/ 10 BAR, temperature ratings as high as 225°F/ 105°C, multiple seal options and replaceable wear rings.

Max Discharge Pressure:  150 PSI / 10 BAR
Max Flow Rate:  230 GPM / 52 mᵌ/hr
Max Viscosity:  1,200 cP
Seal Specifications:  6 Seal Options

Ampco IC+ Series Centrifugal Pumps

The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.

Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end with a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT or ANSI flanges.

The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump and matches matching its hydraulic performance and external footprint.

Max Discharge Pressure:  60 PSI / 4 BAR 
Max Flow Rate:  920 GPM / 209 mᵌ/hr
Max Viscosity:  1,200 cP
Seal Specifications:  1 Seal Option

Ampco D Series Centrifugal Pumps

Setting the standard for CIP supply for decades, the high efficiency D Series pump is a reliable and time tested CIP (Clean In Place) supply/return pump.

To aid in extended seal life, the D series is a closed impeller style pump. It runs quietly and efficiently.

The DV model offers a modified cover with a double volute design to reduce air binding, eliminating the need for an air relief valve.

D Series pumps are affordably priced and can handle temperatures as high as 400°F /204°C.  Pumps come close-coupled to NEMA standard JM motors.

Max Discharge Pressure:  175 PSI / 12 BAR
Max Flow Rate:  630 GPM / 143 mᵌ/hr
Max Viscosity:  1,200 cP
Seal Specifications:  6 Seal Options

AMT Straight centrifugal pedestal pumps

AMT Straight Centrifugal Pedestal pumps are designed for continuous duty OEM, Industrial/ Commercial and processing applications including: circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting. These units are available in a variety of construction and seal materials. Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. Models 4897 and 4906 pedestal drive are epoxy coated and include stainless steel shafts.

• Available in: 300 Series Investment Cast Stainless Steel, Stainless Steel Fitted Cast Iron or Cast Bronze Construction (See Pricebook for Specific Model Availability)
• Mechanical Seal
◆ Stainless Steel Viton®
◆ Cast Bronze Viton®
◆ Cast Iron Buna-N
◆ Optional Silicon Carbide
• 3/4˝ to 1-1/2˝ NPT Suction Port Sizes
• 1/2˝ to 1-1/4˝ NPT Discharge Ports
• Maximum Temperature
◆ Buna-N 180° F
◆ Viton® 200° F
• Maximum 4000 RPM
• High Head Models 4897 & 4906 for High Pressure/Booster Applications
• General Service Models 3682, 3694 & 3704 for Low Pressure Applications

AMT 1-1/2" Bronze centrifugal pumps

AMT Bronze Centrifugal pumps are designed for use with most gravity fed service applications requiring liquid transfer. All models are fitted with a self-cleaning stainless steel impeller for maximum 1/8″ diameter solids handling. Units feature pull-from-rear design for easy servicing without removing piping. Pumps are not self-priming and require flooded suction.

• Bronze Construction
• Buna-N Mechanical Seal and O-Ring
• Maximum Working Pressure 75 PSI
• Maximum Temperature 180° F
• Maximum Flow 130 GPM
• Maximum Head 62 Ft.
• Self-Cleaning, 1/8˝ Diameter Solids Handling Stainless Steel Impeller
• 1/2 to 2 HP Totally Enclosed Fan Cooled (TEFC) Single Phase Motor

AMT 1-1/4" Aluminum centrifugal pumps

The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a “laundry tray” pump, but can be used for most gravity fed general service pumping applications. The 1/8″ diameter solids handling open impeller design makes it particularly adaptable to dirty, as well as clean liquids and is inherently resistant to clogging. The pump is constructed of cast aluminum and features 1-1/4″ NPT suction and discharge ports. Pump is powered by a 1725 RPM, 115 VAC, 1/4 HP motor. Pumps are not selfpriming and require flooded suction.

• Cast Aluminum Construction
• Buna-N Mechanical Seal and O-ring
• 1-1/4˝ NPT Suction and Discharge Port
• Maximum Working Pressure 50 PSI
• Maximum Temperature 180° F
• Maximum Flow 24 GPM
• Maximum Head 11 Ft. (5.2 PSI)
• Self-Cleaning, Semi-Open Impeller
• 1/4 HP, 115 VAC Single Phase Open Drip Proof (ODP) 1725 RPM 48Z Frame Motor
• Continuous Duty Motor

AMT 12 volt centrifugal pumps

AMT 12 Volt DC Washdown pumps are designed for OEM, septic service, pumper and marine applications requiring a DC motor. The motor has a one hour duty rating and is furnished with a stainless steel shaft. This washdown duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Pumps are not self-priming and require flooded suction. Premium 12 Volt DC washdown duty motors are built to handle high pressure washdown and damp/wet environments. The motor features epoxy paint, condensate drains, interior coating to protect against moisture or corrosion, special shaft seals to retard water, 12 Volt DC stud connections with o-ring seals, oversized brushes assuring longer brush life and base mount. Units are not submersible in liquids.
• 300 Series Investment Cast Stainless Steel and Cast Iron with Stainless Steel Impeller Construction
• Viton® Mechanical Seal and O-Ring with Stainless Steel Models
• Buna-N Mechanical Seal and O-Ring with Cast Iron Models
• Discharge Port Rotates in 90° Increments
• (4) Front Drain Plugs
• Maximum Flow 56 GPM
• Maximum Head 80 Ft. (35 PSI)
• High Efficiency Closed Impeller
• 7/8 HP 12 Volt DC Premium Washdown Duty Motor forSevere and Damp/Wet Operating Conditions

AMT 2"x1-1/2" centrifugal pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pullfrom-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4″ diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

AMT 3"x2" centrifugal pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4″ diameter
solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

• Cast Iron Construction
• Silicon Bronze Precision Cast Dynamically Balanced Impeller
• Viton® Silicon Carbide/Carbon Mechanical Seal
• Bronze Case Wear Ring
• 3˝ x 2˝ 125 Lb. 4-Bolt Flanged Ports
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• 1/4˝ NPT Gauge Taps on Suction & Discharge Ports For System Monitoring
• Bronze Shaft Sleeve to Protect Motor Shaft
• Maximum Casing Pressure 175 PSI
• Maximum Temperature 200° F
• Includes Seal Flush/Air Relief Valve
• Front Drain Plugs
• TEFC JM NEMA Frame IE2/EPAC Energy Efficient Motors

AMT 4"x3" centrifugal pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4″ diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

• Cast Iron Construction
• Silicon Bronze Precision Cast Dynamically Balanced Impeller
• Viton® Silicon Carbide/Carbon Mechanical Seal
• Bronze Case Wear Ring
• 4˝ x 3˝ 125 Lb. 8-Bolt Flanged Suction Port & 4-Bolt Flanged Discharge Port
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• 1/4˝ NPT Gauge Taps on Suction & Discharge Ports For System Monitoring
• Bronze Shaft Sleeve to Protect Motor Shaft
• Maximum Casing Pressure 175 PSI
• Maximum Temperature 200° F
• Includes Seal Flush/Air Relief Valve
• Front Drain Plugs
• TEFC JM NEMA Frame IE2/EPAC Energy Efficient Motors

AMT 6"x4" centrifugal pumps

The AMT Cast Iron 1750 RPM Solids Handling End Suction Centrifugal pump delivers high efficiency performance that minimizes operation and energy costs. Built to last, each pump features a precision cast bronze impeller that is dynamically balanced to minimize vibration and maximize motor bearing life. Pull-from-rear design simplifies maintenance without disturbing piping connection. Gauge taps at the suction and discharge ports allow for system monitoring. Maximum 1/4″ diameter solids handling and optional seal flush/air relief valve is available for vertical installations. Pumps require a flooded suction and positive suction pressure.

• Cast Iron Construction
• Silicon Bronze Precision Cast Dynamically Balanced Impeller
• Viton® Silicon Carbide/Carbon Mechanical Seal
• Bronze Case Wear Ring
• 6˝ x 4˝ 125 Lb. 8-Bolt Flanged Suction Port & 4-Bolt Flanged Discharge Port
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• 1/4˝ NPT Gauge Taps on Suction & Discharge Ports For System Monitoring
• Bronze Shaft Sleeve to Protect Motor Shaft
• Maximum Casing Pressure 175 PSI
• Maximum Temperature 200° F
• Includes Seal Flush/Air Relief Valve
• Front Drain Plugs
• TEFC JM NEMA Frame IE2/EPAC Energy Efficient Motors

AMT bronze marine centrifugal pumps

The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and feature provisions for the installation of a seal wash, front drain plug and pullfrom-rear design. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a stainless steel shaft. On/off switch and line cord are standard. The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications in live well tanks, circulation and chemical transfer. This pump is fitted with a 1/8 HP, 12 Volt DC, 3700 RPM motor. Pumps are not self-priming and require flooded suction.

• Bronze Construction
• Buna-N Mechanical Seal and O-Ring
• Maximum Working Pressure 50 PSI
• Maximum Temperature 180° F
• Maximum Flow 17 GPM
• Maximum Head 12 Ft.
• Self-Cleaning, Semi-Open Impeller
• Totally Enclosed Motors
• 12 Volt DC or 115 VAC Motor, Depending on Model

AMT 3/4" to 2" centrifugal pumps

AMT Solids Handling Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8″ diameter depending on the model. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

• Cast Iron Construction
• EPDM/EPR Mechanical Seal and O-Rings
• Discharge Port Rotates in 45° Increments
• Solids Handling, Clog Resistant Impeller
• 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors
• 3/4˝ to 2˝ NPT Sizes
• Maximum Working Pressure 125 PSI
• Maximum Flow 180 GPM
• Maximum Head 95 Ft. (41 PSI)
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• Multiple 1/2˝ NPT Drain Ports

AMT heavy duty centrifugal pumps

AMT Heavy Duty Solids Handling End Suction Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful in
applications involving up to 1/8″ diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.

• Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller
• Buna-N Mechanical Seal and O-Ring on Cast Iron Models
• Viton® Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
• Optional Silicon Carbide SealsAvailable
• Front Drain Plugs Located 90°Apart
• Maximum Head 194 Feet (84 PSI)
• Maximum Flow 500 GPM
• 2 HP to 15 HP NEMA Motors, Single and Three Phase
• Optional Mounting Base Available

AMT high head centrifugal pumps

AMT High Head End Suction Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling, sprinkler/fire protection systems and pressure boosting. These heavy duty high pressure pumps are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency closed impeller maximizes performance. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) or Open Drip Proof (ODP) motors. Pumps are not self-priming and require flooded suction.

• 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller
• Viton® Mechanical Seal and O-Ring with Stainless Steel and Bronze Models
• Buna-N Mechanical Seal and O-Ring with Cast Iron Models
• Optional Silicon Carbide Mechanical Seals Available
• Discharge Port Rotates in 90° Increments
• 489 Series: 1-1/4˝ x 1˝ Ports
• 490 Series: 1-1/2˝ x 1-1/4˝ Ports
• High Efficiency Closed Impeller
• Maximum Flow 118 GPM
• Maximum Head 149 Ft. (65 PSI)

AMT small centrifugal pumps

AMT Small End Suction Centrifugal pumps are designed for continuous-duty low pressure OEM, Industrial/Commercial and general service applications including circulation, chemical processing, liquid transfer, dirty water and cooling. These durable and compact pumps are available in a variety of construction and seal materials to meet your
specification. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impeller prevents clogging and handles solids of 1/8″ diameter. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
• Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Construction
• Viton® Mechanical Seal and O-Ring with Stainless Steel and Bronze Models
• Buna-N Mechanical Seal and O-Ring with Cast Iron Models
• Discharge Port Rotates in 90° Increments
• Self-Cleaning, Semi-Open Impeller
• Maximum Flow 90 GPM
• Maximum Head 65 Ft. (28 PSI)

AMT stainless centrifugal pumps

AMT Stainless Steel End Suction Centrifugal pumps are designed for continuous duty high flow and high pressure applications including: chemical processing, liquid transfer, cooling, pressure boosting, circulating, dirty water and applications requiring contaminant free pumping. Constructed of rugged deep drawn stainless steel for durability and corrosion resistance. Investment cast stainless steel closed impeller for enhanced performance, high efficiencies and handles a maximum of 1/8″ diameter solids. All models include Viton® Type 21 mechanical seals and O-rings which offer a broad range of chemical compatibility. Cast iron motor adapter provides a positive and rigid mounting to motor. Pumps include Totally Enclosed Fan Cooled (TEFC) motors or Open Drip Proof (ODP) motors by special quote. Pumps are not self-priming and require flooded suction.
• Stainless Steel Construction with Viton® Mechanical Seal and O-Ring
• Investment Cast Stainless Steel Impeller
• High Head and High Volume Models
• Maximum Temperature 200° F
• Maximum Flow 156 GPM
• Maximum Head 130 Ft.
• Chemical Resistant Design
• Discharge Port Rotates in 90° Increments
• 547 Series: 3/4˝ x 1/2˝ Ports and
1-1/4˝ x 3/4˝ Ports
• 548 & 553 Series: 1-1/2˝ x 1-1/4˝
• 549 Series: 2˝ x 1-1/2˝ Ports

Cornell Food Processing Pumps

Cornell introduced the first Hydro-Transport food process pump to the industry nearly 50 years ago. Unlike other solids handling pumps, or other types of pumps that are sometimes used in the food industry, the Cornell P and PP series pumps are designed and manufactured with the sole purpose of pumping food products. Ideal for applications such as fruit washing and packing as well as many other food processing operations. Utilizing Cornell inventions such as an offset volute, Cornell food process pumps have the lowest product damage rates in the industry and are the pump of choice for food processors  around the world.

Cornell Hot Oil Pumps

Enhanced vapor handling and improved sealing technology are central to Cornell’s latest hot cooking oil pump innovations. When fresh product passes through a fryer, water tends to travel along the bottom of the fryer in a liquid phase at 392°F (200°C), until it reaches the pump suction where the action of the impeller breaks up the water into smaller droplets that flash into steam. Ordinarily, entrained steam would impair the pump’s head and flow, but Cornell’s innovative anti-cavitation system prevents this situation.

Features and Benefits:

• Uniform thermal expansion
• Ductile iron and stainless steel construction also available
• External balance line for lower seal box pressure, particle removal and reduced axial loading
• Vapor suppression line to help eliminate flashing of water-entrained oil
• Handles temperatures up to 550 °F
• Oil-lubricated bearing frames
• Replaceable wear rings and shaft sleeves
• Fully-machined impellers
• Heavy-walled castings
• Two-year warranty
• Low cost of repair
• High efficiency

Cornell Industrial Pumps

CLEAR LIQUID PUMPS

Cornell’s Clear Liquid pumps are known around the world as the most durable, most reliable, highest efficiency pumps in the industry. They can be found in a variety of applications in the Agricultural, Industrial, and Municipal markets and are available in Close-Coupled, SAE Engine Mounted, Horizontal, and Vertical Configurations.

SOLIDS HANDLING PUMPS

Cornell offers a wide range of solids handling pumps, from 1.25″ though 30″ discharge size, to handle the most difficult solids applications. Cornell’s solids handling pumps can be found in a wide range of applications in the Municipal, Agricultural, and Industrial markets; and available in a variety of mounting configurations including close-coupled, SAE engine, horizontal, and vertical mounted. Featuring enclosed, semi-open, and delta impellers, and a variety of construction materials, Cornell solids handling pumps operate up to 40,000 GPM.

ASP SSP/C Pumps

• Flow Rates to 250-gpm and Heads to 127 feet
• System pressures up to 120 psig
• Differential pressures up to 55 psig
• All Stainless Steel Construction
• 56J frame: 1/2 through 7.5 horsepower motors
• Service in both 50 and 60-Hz
• Stainless steel casing and impellers
• Multiple mechanical seal materials available to suit application
• Our exclusive design allows for use with easy to locate replacement parts. No more hard to find Metric and custom seals and fasteners

ASP FSP Pumps

• Both open and enclosed impellers are interchangeable between pump models FSP and SSP/C
• System pressures up to 50 psig
• 4-3/8″ impeller diameter as standard. Larger available as special order.
• Ryton sealplate is good for temps in excess of 212°F
• 56J frame: 1/2 through 2 horsepower motors
• Service in both 50 and 60-Hz
• Stainless steel casing and impellers
• Multiple mechanical seal materials available to suit application
• 1.25″ NPT suction nozzle and a 1.0″ NPT discharge nozzle
• Replace your current pumps with a more affordable, more efficient and better looking design

ASP 7SP Pumps

• Flow Rates to 63-gpm and Heads to 192 feet
• System pressures up to 120 psig
• Differential pressures up to 83 psig
• All Stainless Steel Construction
• 56J frame: 2 through 5 horsepower motors
• Service in both 50 and 60-Hz
• Stainless steel casing and impellers
• Multiple mechanical seal materials available to suit application
• 1.25″ NPT suction nozzle and a 1.0″ NPT discharge nozzle
• Our exclusive design allows for use with easy to locate replacement parts. No more hard to find Metric and custom seals and fasteners

MDM ValuFlo Series

The MDM ValuFlo^® Series of pumps deliver big performance with minimal power. The people behind ValuFlo pumps named the product line to reflect the stringent set of standards against which ValuFlo performance is measured. ValuFlo products were designed to achieve a unique level of economy with high efficiency in a reliable, long-life pump. ValuFlo products offer extremely low total cost of ownership.  Great for smaller and simple applications, motors are 115 volt and totally-enclosed fan-cooled for durability.  Supplied with an 8-foot cord set. Made in the USA.

MDM Sequence Series

MDM Sequence Series pumps are the leader in high efficiency and performance.  Sequence is the name you can trust to provide the lowest cost of ownership. Their longevity is legendary.  If overall value is the benchmark, Sequence products are the standard.  Our pumps can serve a wide variety of water transfer and re-circulation applications.  They are designed to operate efficiently over a wide range of flows and pressures.  In larger systems, you can use two or more Sequence pumps in parallel to multiply your flow.  They can also be customized for saltwater use.  Conducive to installations near areas of relaxation and entertainment, Sequence pumps generate minimal noise levels.

MDM Advance Series

The MDM Advance Series is one of the most efficient and adaptable centrifugal pumps of its kind. With an evenly balanced delivery of flow and pressure, the design of the pump, coupled with the chosen resins, produces a strong, durable and versatile unit that allows for a broad range of applications.

MDM GENESYS SERIES

The MDM Genesys Series non-metallic, end-suction centrifugal pump line is designed and engineered to provide highly efficient chemical and other fluid pumping solutions.

The Genesys composite construction with no wetted metal parts gives it compatibility with many aggressive chemicals. The unique closed-impeller and time-tested volute design render performances up to 340 GPM and 178’ of shut off head with peak performances at 76% efficiency.

Genesys pumps are among the first to demonstrate a strong yet simple economic reason to start switching to BMC thermosets: Compared to metallic materials of construction, thermosets are about half the cost. BMC provides Genesys pumps with a set of material properties that are better than metallic or thermoplastic components, including equal or higher strengths and stiffness/dimensional stability.  BMC offers low shrink and low warp; it molds to net dimensions and holds tight tolerances.